Power Liftgate Struts for Tesla Model Y (1500601-00-A 1500602-00-A)

Upgrade your Tesla Model Y with these Power Liftgate Struts (1500601-00-A, 1500602-00-A). Designed for left and right sides, they restore smooth, balanced liftgate operation. Built to last with durable, corrosion-resistant materials and easy installation for hassle-free cargo loading.

Key Features:

Compatibility: Engineered for the Tesla Model Y equipped with a power liftgate system, the left strut (1500601-00-A) and right strut (1500602-00-A) are side-specific. Each unit is built to match factory length, stroke, and connector layout to ensure correct fitment and alignment.

Durable Construction: Constructed with sealed internal components and a corrosion-resistant outer finish, these liftgate supports are built to handle repeated opening cycles and varying weather conditions. The housing and rod materials are selected for long-term reliability.

Integrated Electrical Connection: Left powered strut is equipped with a factory-style connector that integrates with the Model Y liftgate control system. The wiring layout follows OEM design standards to maintain communication with the vehicle’s electronics.

Side-Specific Configuration: The 1500601-00-A strut is installed on the left (driver) side and includes the appropriate electrical integration for powered operation. The 1500602-00-A unit is designed for the right (passenger) side. Proper side selection is important to maintain balanced liftgate movement.

Restores Smooth Liftgate Operation: When liftgate struts begin to weaken, the rear hatch may open slowly, stop midway, or require manual assistance. Replacing worn struts helps restore steady upward support and balanced movement, improving everyday usability when loading cargo or groceries.

Direct Replacement Installation: Installation follows factory mounting studs and electrical connectors without modification. Basic mechanical knowledge is recommended, and professional installation may be helpful to ensure proper alignment and safe handling of pressurized components.

• Open the liftgate fully.
• Warning: Use a specialized telescopic support rod or have an assistant hold the liftgate securely. Never attempt to remove a strut without supporting the liftgate, as it is heavy and will fall instantly, causing injury or vehicle damage.

• Carefully remove the interior C-pillar trim or headliner edge to access the internal connector.
• Disconnect the electrical harness from the vehicle's power supply.
• Push the rubber grommet out from the body hole to release the wiring.

• Use a small flat-head screwdriver to slightly pry up the retaining clips on the ball studs (at both the vehicle body and the liftgate ends).
• Pull the old strut away from the ball studs.

• Clean: Wipe the ball studs clean of any old grease or debris.
• Harness: Feed the new wiring harness through the body hole. Ensure the grommet is fully seated and flush to maintain a watertight seal.
• Mounting: Align the new strut with the ball studs. Press firmly until the retaining clips "click" into place. (Check that the clips are fully locked).
• Connecting: Plug the internal electrical connector back in and reinstall any removed trim pieces.

• Remove the support rod.
• Reset: Manually close the liftgate once to synchronize the sensors.
• Height Setting: Open the liftgate, manually adjust it to your desired height, then press and hold the liftgate button for 3 seconds until you hear a "beep" to save the setting.
• Test: Cycle the liftgate 3 times to ensure smooth operation.

• Tension Balance: If the liftgate operates unevenly, it is highly recommended to replace both the left (1500601) and right (1500602) struts at the same time.
• Water Ingress: Always double-check the rubber grommet. A loose grommet is a common cause of water leaks into the trunk area.

🔹Frequently Asked Questions (FAQ)

Q1: How do I know which side I need?
1500601-00-A is the left (driver side) strut, and 1500602-00-A is the right (passenger side). If unsure, check your original part label or consult a technician.

Q2: Should both sides be replaced at the same time?
If both sides have similar wear or mileage, replacing them together helps maintain balanced lift and consistent performance.

Q3: What are the signs that liftgate struts need replacement?
Common signs include the hatch not staying open, slow or uneven lifting, unusual noises during operation, or the liftgate requiring manual assistance.