1 / 15

Front Bumper Fender Bracket for Tesla Model X 2019–2020 | OE Ref 1095793-00-B / 1095794-00-B

Fra $39.00 USD
Style
Mängden
  • Free Shipping:Free standard shipping on orders over $129

  • Returns within 30 Days

Product Description

Help restore the front bumper’s fender-side attachment on your 2019–2020 Tesla Model X. This new black plastic replacement bracket locates and retains the bumper cover’s outer edge when the original bracket is damaged. Choose Left, Right or a Pair to match your repair. OE references: Left 1095793-00-B; Right 1095794-00-B. Brackets only; mounting hardware is not included.

Key Features

1. Help Restore Bumper Attachment

Replace a damaged bracket to help locate and retain the front bumper cover’s outer edge at the fender connection.

2. Keep the Repair Focused

When the surrounding panels and mounting points remain sound, address the damaged bracket while retaining serviceable bumper and fender panels for reuse.

3. Match the Correct Side

Separate Left and Right versions for the 2019–2020 Tesla Model X correspond to OE references 1095793-00-B and 1095794-00-B respectively.

4. Integrated Retaining and Mounting Features

Molded retaining tabs, a circular mounting boss, an end mounting ear and reinforcement ribs are incorporated into the bracket’s structure.

5. Start with a New Bracket

Supplied as a brand-new aftermarket part in black plastic for replacement of a bracket with a cracked body or damaged molded tabs.

6. Choose One Side or Both

Buy one Left or Right bracket for a single-side repair, or select a Pair containing one of each when both sides need replacement.

Pain Points & Solutions

Pain Point 1 — The bumper corner will not remain securely attached

A cracked bracket or broken retaining tabs can leave the bumper’s fender-side edge loose or partially disengaged.

Solution: Replace the damaged bracket to restore the intended local mounting and retention interface.

Pain Point 2 — Only the bracket is damaged after bumper removal or body repair

Replacing unrelated exterior panels adds cost when the surrounding parts remain serviceable.

Solution: Choose the affected Left or Right bracket as an individual replacement after the full mounting area has been inspected.

Pain Point 3 — Left and Right parts are easy to confuse

The two brackets look similar but are mirrored and cannot be interchanged.

Solution: Match the required side to its dedicated OE reference, or choose the Pair option when both sides are needed.

Pain Point 4 — A visible bumper gap has more than one possible cause

A damaged bracket may contribute to poor attachment, but a distorted bumper cover, fender or adjacent mounting point can create the same symptom.

Solution: Inspect the complete bumper-to-fender connection before ordering so the bracket is replaced only when it is the actual damaged component.

Why Choose This Replacement?

If your 2019–2020 Model X has a damaged bumper-to-fender bracket and the surrounding panels and mounts are sound, this replacement lets you repair the affected connection while retaining those panels. You get a new black plastic bracket with integrated retaining tabs and mounting features, with individual sides and a pair available to suit the job.

Choose Left or Right for a repair on one side, or a Pair when both brackets need replacing. Match the OE reference and bracket shape to your existing part, then select the option your repair requires.

Specifications

Specification Details
Product Name Front Bumper-to-Fender Mounting Bracket
Product Type Replacement Part
Condition Brand-new aftermarket replacement
Vehicle Tesla Model X
Fitment Offered 2019–2020 only
Position Front bumper cover-to-fender connection area
Left OE Reference 1095793-00-B
Right OE Reference 1095794-00-B
Material Plastic
Color Black
Side Design Left and Right are side-specific and not interchangeable
Available Options Left / Right / 1 Pair
Installation Method Integrated retaining clips and a bolted mounting point
Mounting Hardware Not included

Variant & Package Guide

Select This Option OE Reference You Will Receive
Left 1095793-00-B 1 × Left Front Bumper-to-Fender Bracket
Right 1095794-00-B 1 × Right Front Bumper-to-Fender Bracket
1 Pair 1095793-00-B + 1095794-00-B 1 × Left Bracket + 1 × Right Bracket

Left and Right are determined while seated in the vehicle and facing forward. Do not select the side using “driver” or “passenger” position.

Package Does Not Include

  • Separate screws, bolts or loose mounting clips
  • Front bumper cover
  • Front fender
  • Wheel arch liner or fender garnish
  • Tools, instructions or other replacement parts

Check Before Ordering

Confirm all four points before purchase:

  1. Vehicle: Tesla Model X, model year 2019 or 2020.
  2. Side: Left, Right or both sides.
  3. OE reference: 1095793-00-B for Left or 1095794-00-B for Right.
  4. Physical match: Compare the bracket outline, retaining tabs, circular mounting boss and end mounting ear with the removed part.

If the vehicle has previous body repairs or the existing part number cannot be confirmed, verify the application before ordering.

Installation

Professional installation is recommended.

The bracket sits behind the front bumper and wheel-arch trim area. Access requires releasing surrounding components before the bracket’s retaining clips and bolted mounting point can be serviced.

Before installation:

  • Inspect the bumper cover, fender and adjacent mounting points for cracks, distortion or missing retainers.
  • Confirm that the replacement bracket matches the required side before fitting it.
  • Do not force, drill, trim, heat or reshape the bracket to compensate for a mismatch.
  • Inspect the vehicle’s existing fasteners and follow current service information for installation and torque requirements.

Frequently Asked Questions

Is this a genuine Tesla part?

No. This is a brand-new aftermarket replacement. The OE references are provided only to help identify and verify the required part.

Which years does this listing cover?

This TESMAG listing is offered only for the 2019–2020 Tesla Model X.

Are Left and Right interchangeable?

No. They are mirrored, side-specific brackets. Left corresponds to 1095793-00-B and Right corresponds to 1095794-00-B.

What is included with the Pair option?

One Left bracket and one Right bracket.

Are mounting bolts or screws included?

No. The package includes only the selected bracket or bracket pair.

Will replacing this bracket always correct a bumper gap?

No. It addresses a damaged bracket only. A deformed bumper cover, fender or damaged surrounding mount must be diagnosed and repaired separately.

Can I install it without removing surrounding components?

The bracket is positioned behind the bumper and wheel-arch trim area. Access requires releasing surrounding components, so professional installation is recommended.

How do I choose the correct side?

Left and Right are determined while seated in the vehicle and facing forward. Match the OE reference and bracket shape on your vehicle before ordering: Left 1095793-00-B; Right 1095794-00-B. Do not select the side using “driver side” or “passenger side” terminology.

Shipping & Return

Handlekurven Din

Laster