Free Shipping:Free standard shipping on orders over $129
Returns within 30 Days
Product Description
Keep your home charging area organized with a 3.5 m self-locking EV charger cable retractor. Its retractable tether supports part of your existing charging cable to help reduce floor contact and loose cable clutter. Pull to extend and lock; pull again and guide the tether back after charging. Choose Side Mount or Top Mount for your space. Fits compatible charging cables with 12, 15, or 18 mm outer diameters. Charger and charging cable not included.
Key Features
Self-Locking Retractable Mechanism
Pull out the tether to the length you need and allow the self-locking mechanism to hold its position. When charging is complete, pull again to release and guide the tether back for controlled cable storage.
3.5 m Retractable Tether
The 3.5 m tether provides adjustable movement for managing your existing EV charging cable. Extend the tether when reaching your vehicle, then retract it after use.
Helps Keep Charging Cables Off the Floor
Lift and support excess charging cable instead of leaving loose sections spread across your garage floor. Proper positioning helps reduce unnecessary ground contact and keeps the charging area more organized.
Two Mounting Options
Choose Side Mount for a suitable vertical wall or post, or Top Mount for a structurally secure overhead surface. Each version includes mounting hardware specific to its installation configuration.
Three Cable-Fit Sizes
The cable-clamping system supports the specified 12 mm, 15 mm, and 18 mm cable outer diameters. Select the appropriate rubber sleeve size to match your charging cable and help secure it within the clamp.
Mechanical Cable Management Without Charger Modifications
The retractor uses a separate mechanical tether and cable clamp to support your existing charging cable. It does not require an electrical connection to the charging system or alter the charger's electrical operation.
Everyday Charging Problems & Solutions
Pain Point: Charging Cables Lying on the Garage Floor.
Solution: Keep Excess Cable Supported
The retractable tether helps lift sections of your charging cable, reducing loose cable contact with the floor when installed in a suitable position.
Pain Point: Reorganizing the Cable After Every Charge.
Solution: Guided Retractable Storage
Instead of manually gathering all the cable slack after each session, release the mechanism and guide the tether back to help return the charging cable to its storage position.
Pain Point: Retraction Force While Reaching the Vehicle.
Solution: Self-Locking Cable Positioning
The self-locking mechanism lets you pause the tether at a working length. This makes it easier to position your charging cable without immediately retracting the tether.
Pain Point: Different Garage Mounting Requirements
Solution: Side or Top Mount Configuration
Choose the mounting version that matches your available space. Install it beside your charging station on a suitable wall or overhead on a secure mounting structure.
Why Choose This EV Charger Cable Retractor?
A More Organized Daily Charging Setup
Help keep excess charging cable off the floor and make your home charging area easier to manage.
Controlled Extension and Return
The self-locking design allows you to extend, hold, and release the retractable tether as needed.
Mounting Options for Different Spaces
Choose between Side Mount and Top Mount instead of relying on a single mounting arrangement.
Clear Cable-Fit Options
The 12 mm, 15 mm, and 18 mm cable sleeve sizes help you select a clamp configuration based on your existing cable's outer diameter.
Product Specifications
| Specification | Details |
|---|---|
| Product Type | EV Charging Cable Retractor |
| Retractor Design | Mechanical, self-locking |
| Tether Length | 3.5 m (approx. 11.5 ft) |
| Main Function | Retractable support for EV charging cables |
| Mounting Options | Side Mount / Top Mount |
| Cable Clamp Fit Sizes | 12 mm / 15 mm / 18 mm |
| Housing Color | Black |
| Front Housing Marking | PULLBOX |
| Approx. Housing Dimensions | 205 × 178 × 77 mm (8.1 × 7.0 × 3.0 in) |
| Installation Location | Suitable structural wall or overhead mounting surface |
| Electrical Connection | None required for the retractor |
| Charging Cable | Not included |
| EV Charger | Not included |
Important: The 3.5 m specification refers to the retractable tether. It does not increase the electrical length or reach of your existing charging cable.
Compatibility & Fitment
This EV charger cable retractor is designed for compatible EV charging cable setups, including Tesla home charging applications.
Compatibility depends primarily on the charging cable and installation conditions rather than vehicle model year.
Tesla & Other EV Charging Setups
The retractor may be used with compatible Tesla and other EV charging cables, including setups using NACS, J1772, or Type 2 connectors.
However, connector type alone does not determine fit. Always check the cable's actual outer diameter, weight, clamp fit, and routing before installation.
Installation Options
Side Mount – Wall Installation
Designed for suitable vertical mounting surfaces near an EV charging station.
Ideal for charging setups where a secure wall or post is available beside the parked vehicle.
Top Mount – Overhead Installation
Designed for structurally secure overhead mounting surfaces.
The Top Mount version includes an additional L-shaped mounting bracket and corresponding hardware for its mounting configuration.
Package Contents
Choose the package that matches your selected mounting version.
| Included Component | Side Mount | Top Mount |
|---|---|---|
| EV Cable Retractor Unit | 1 | 1 |
| Standard Mounting Bracket | 1 | 1 |
| Rubber Cable Sleeves (12 / 15 / 18 mm sizing) | 2 | 2 |
| Cable Clamp Pieces | 2 | 2 |
| Cable-Retaining Collar | 1 | 1 |
| M6 Expansion Bolts | 4 | 4 |
| M5 Screw | 1 | 1 |
| M6 Screw | 1 | 1 |
| M3 Screws | 4 | 4 |
| Additional M6 Mounting Screws | — | 4 |
| M8 Expansion Bolts | — | 2 |
| L-Shaped Mounting Bracket | — | 1 |
Please Note:
Side Mount and Top Mount are separate package options.
The Top Mount version includes the additional L-shaped bracket and mounting hardware listed above.
Product display images may show only the main components. Refer to this package list for the complete supplied hardware.
Frequently Asked Questions
Q: Is this EV charger cable retractor compatible with Tesla vehicles?
A: This mechanical cable-management accessory may be used with compatible Tesla home charging setups, including Model 3, Model Y, Model S, Model X, and Cybertruck applications. Compatibility depends on your actual charging cable diameter, weight, mounting position, and cable route—not vehicle model alone.
Q: Does it work with other electric vehicles?
A: It may also be used with compatible non-Tesla EV charging cables. The retractor attaches to the outside of the cable rather than the charging connector. Measure the cable and check installation conditions before ordering.
Q: Does the 3.5 m length refer to the charging cable?
A: No. The 3.5 m specification refers to the retractable tether inside the retractor. Your existing EV charging cable remains separate and must provide enough reach to connect to the vehicle.
Q: How does the self-locking mechanism work?
A: Pull the tether outward to the desired position and allow it to lock. When finished, pull again to release the mechanism, then guide the tether back slowly. Always control the cable during retraction.
Q: Which mounting version should I choose?
A: Choose Side Mount for a suitable vertical wall or post. Choose Top Mount for a structurally secure overhead installation. The Top Mount package includes an additional L-shaped bracket and its corresponding hardware.
Q: What charging cable diameters are supported?
A: The supplied clamping system is specified for 12 mm, 15 mm, and 18 mm cable outer diameters. Measure the outside of your existing charging cable rather than its connector. A secure fit must be confirmed before use.
Shipping time depends on the product.
Free shipping on all orders $129+ worldwide!
For all orders under $129, the shipping fee is $5
| Product Type | Handling Time | Shipping time |
| Fast Shipping Products | 0-1 calendar days | 4-12 calendar days |
| Standard Products | 1-2 calendar days | 6-12 calendar days |
| Customized Products | 3-5 calendar days | 10-16 calendar days |
We will make every effort to deliver your package ASAP. However, additional time may be required due to invalid addresses and custom clearance issues. We have many cooperative express companies, such as DHL, FedEx, UPS, and USPS. We will choose the most suitable mode of transportation for you according to your country.
If the product is a customized product and in production, no refund or return without quality problems. After we receive your return, our quality assurance team will check your return. After the inspection is complete, our customer service representative will process your return refund or assist you in placing a replacement order for a replacement.
Damages and Issues:
If your product arrives damaged, or you receive the wrong product, please email us immediately at contact@teslaacessories.com with clear pictures of the damaged or incorrect product. We will review it in 1 business day and upon approval, we will dispatch a brand new replacement. Your 100% satisfaction is important to us.
Return Qualification Requirements:
1). Orders exceeding 1 month do not accept return or exchange of goods.
2). Orders only accept return or exchange of goods within 30 days.
3). No return or exchange on customized products(eg., Yoke Steering Wheel)
Refund instructions:
You will be responsible for paying the freight of the returned goods, as well as the possible customs duties and other expenses. Freight is nonrefundable. If you receive a refund, the return freight will be deducted from your refund.
For an item to be eligible for a return, it must remain in the condition it was received: unused, unworn, tagged, and in its original packaging.
Prior to initiating a return, please reach out to us at contact@teslaacessories.com. You can expect a response from us within 1 business day. Once your return is accepted, we will share detailed instructions for your return process. Please provide us with the tracking number and your order number once the return shipment has been arranged.
Upon receiving and verifying that the returned product adheres to our return conditions, we will commence your refund process within 1 business day using your original payment method. Be advised that all refunds may take up to 2 business days to process once we receive the returned item.Returns sent without prior approval will not be accepted.
Refunds & Order Cancellation
Please note that if you request a refund due to personal reasons after placing an order, a 5% transaction fee will be deducted from the refund amount. This fee is charged by the payment processor, not TESMAG. Therefore, the actual refund received will be less than the original payment amount.
To avoid any inconvenience or loss, we kindly ask you to double-check your order before completing the purchase. Mistakenly placed orders may incur this additional fee, so we encourage careful attention during checkout.
Return Fee
If a return is due to a product being “damaged or shipped incorrectly,” the customer does not need to pay the return shipping fee. If a return is due to “purchasing the wrong item or no longer needing it,” the customer is responsible for the return shipping fee, and the actual shipping cost will be deducted from the refund. In either case, no restocking fee will be charged for the return.
If a package is missing parts or has incomplete contents, the seller will reship the missing items based on the actual situation. If the buyer does not agree to a reshipment and chooses to return the item, the buyer is responsible for the return shipping costs.
Non-Returnable Items:
Steering wheels, seat covers, and gift cards are custom-made and special-order items; returns are not accepted. If you have any questions about specific products, please contact us.
It is essential to ensure accuracy when filling out the return address. Please be aware that we cannot be held responsible for any returns that are lost or misdirected due to incorrect address information.
If due to our reasons, the goods received are damaged or not correct, the consumer is not required to bear the shipping fee for this reason.
Should you have any queries regarding returns and refunds, please don't hesitate to reach out to us at contact@teslaacessories.com.
Laden
