Tesla Model 3/Y 6.2'' LCD Dashboard Screen

Advanced Design: The F62 Dashboard display is an excellent vehicle display for Tesla Model 3 and Model Y, using a Linux high-performance operating system. With a 6.2-inch high-definition 2.5D IPS true-color full-view screen, the resolution of 960*360P provides clear and vibrant visual effects

Easy Installation: Plug & Play; installation time within 20 minutes; no drilling required; does not damage the original vehicle harness or function.

Installation Manual: Click Here

Powerful Functions:

• Information Sync: Time display, Turn signal lights (left and right), Rear fog light, Position lights, Low beam headlights, High beam headlights, Automatic braking, Seat belts, Outside temperature, Speed limit reminder, Battery usage, Distance display, Speed/Door open information, Gear position information, Range, Total mileage, Tire pressure display, Sport mode, Automatic switching between KM and MPH
• Creative UI themes: minimalist, classic, or sporty
• Brightness adjustment: Adaptive day and night mode
• Compatible with original vehicle button controls
• Support Bluetooth OTA upgrade
• Sync automatic pilot driving assistance icons and Plaid mode
• 5 optional car model colors: white, red, black, blue, and gray
• Charging prompt
• Left and right blind spot warning

Common Troubleshooting Guide

FAQ 1: Black Screen (Screen Installed but Not Lighting Up)

Reason 1: Other factors causing abnormal operation of the microprocessor

Solution: Restart the key.

Reason 2: The main unit plug was disconnected and not reconnected within 5 minutes.

Solution: Reconnect the wiring harness, lock the car for 2 hours, keep the phone and remote key more than 20 meters away from the car, and check if the screen can light up after 2 hours.

Reason 3:The main unit or screen plug is not securely connected.

Solution: Reconnect the main unit plug.

FAQ 2: No Display during Startup

Reason: Backend data error.

Solution: Reconnect the main unit plug.
          
FAQ 3: Original Car Information Not Synchronized or Not Displaying

Reason: Power and protocol lines are not connected.

Solution: Reconnect and inspect the wiring interfaces.
          
FAQ 4: How to Switch between Day and Night Modes

Reason: Push the left and roll the right wheel for 3 seconds to enter the settings interface.

Solution: Set it to manual or automatic mode.
     
FAQ 5: Brightness Adjustment

Reason: Push the left and roll the right wheel for 3 seconds to enter the settings interface.

Solution: Set to the desired brightness.
          
FAQ 6: How to Switch Car Body Color

Reason: Push the left and roll the right wheel for 3 seconds to enter the settings interface.

Solution: Set it to the desired color.

FAQ 7: How to Switch UI Interface

Reason: Push right and roll the right wheel for 3 seconds to enter the UI switching interface.

Solution: Set the desired UI.