1 / 11

Parking Sensor Front & Rear Park Assist for Tesla Model S/X (1063119‑00‑A)

$39.00 USD
Model
OEM
Quantity
  • Free Shipping:Free standard shipping on orders over $129

  • Returns within 30 Days

The Tesla Parking Sensor OEM 1063119‑00‑A is a critical component of your Tesla’s Park Assist system, providing accurate front and rear obstacle detection. Compatible with Model S (2012–2021) and Model X (2016–2021), this sensor restores full parking assist functionality for safer, more confident maneuvering.

Please note: This is a pre-owned product. It has been thoroughly tested to meet OEM performance standards and is guaranteed to function like a new sensor.

Manufactured with engineering-grade, UV-resistant plastic and precision ultrasonic elements, this sensor withstands extreme weather and road debris. It integrates seamlessly with Tesla’s PDC system, delivering real-time audio-visual alerts without additional programming.

Whether replacing a faulty sensor or upgrading your system, this pre-owned high-quality part ensures your Tesla maintains optimal Park Assist performance, reduces low-speed collision risk, and improves overall parking safety.


Specifications

Specification Details
Product Name Tesla Parking Sensor
OEM Number 1063119‑00‑A
Material Engineering-Grade Plastic, UV-Resistant, Weatherproof
Sensor Type Ultrasonic Park Assist Sensor
Installation Position Front or Rear Bumper
Vehicle Compatibility Model S (2012–2021), Model X (2016–2021)
Color Black
Condition Pre-Owned, OEM-Spec Replacement
Installation Type Plug-and-Play, No Programming Required

Vehicle Compatibility

  • Tesla Model S – 2012 to 2021
  • Tesla Model X – 2016 to 2021
Works for both front and rear bumpers, fully restores Park Assist functionality.

Installation Instructions

Tools Required

  • Plastic pry tool set (to avoid scratching bumper)
  • Jack & safety stands (for under-vehicle operation)
  • Isopropyl Alcohol (IPA) wipes (for cleaning)
  • New rubber seal (included with sensor, replace old one)

Installation Steps

  1. Enter Jack Mode on your Tesla (Controls > Service > Jack Mode), then disconnect the 12V battery negative terminal for safety.
  2. Locate the faulty sensor on the front/rear bumper. For front sensors: remove the front wheel arch liner (4 clips) to access the sensor wiring.
  3. Disconnect the sensor connector: DO NOT press the red locking tab down — pull it away from the connector to unlock, then pull the connector apart.
  4. Remove the old sensor: from the back of the bumper, gently pry the 2 elastic clips with a plastic tool, then push the sensor out from the front of the bumper.
  5. Clean the mounting ring and contact surface with IPA wipes. Replace the old rubber seal with the new one (included).
  6. Align the new sensor with the mounting ring (match the direction mark), then press firmly until you hear a "click" (both clips locked in place).
  7. Reconnect the sensor connector until the red locking tab clicks into place. Secure the wiring with original clips to avoid interference.
  8. Reinstall the wheel arch liner (if removed), reconnect the 12V battery, and exit Jack Mode.
  9. Calibrate the PDC system with a Tesla diagnostic tool (Tesla Toolbox 3) to clear fault codes and ensure proper function.

Important Warnings

  • ✅ Always use the new rubber seal — old seals lose waterproof performance and cause sensor failure.
  • ✅ Never use metal tools to pry the sensor or connector (avoids scratches and damage).
  • ✅ Do NOT press the red locking tab down when disconnecting the connector (will damage the tab).
  • ✅ Calibration is mandatory after installation — otherwise, the PDC system may misreport or fail to work.
  • ✅ Do not apply lubricant or sealant on the sensor surface (interferes with ultrasonic signals).
Note: Professional installation is recommended. If you are not familiar with vehicle maintenance, please contact a certified Tesla technician.

Tip: Keep sensors clean for accurate detection and avoid debris accumulation.


Package Includes

  • 1 × Pre-Owned Tesla OEM Parking Sensor 1063119‑00‑A

Why Choose Us

  • Pre-Owned OEM Quality Assurance – Thoroughly tested to match original Tesla performance.
  • Direct Replacement – Plug-and-play with Tesla Park Assist system.
  • Durable & Reliable – UV-resistant and weatherproof design for long-term use.
  • Restore Safety & Confidence – Accurate obstacle detection for safer parking.
  • Fast & Reliable Shipping – Serving US Tesla owners with premium support.

Customer Pain Points & Solutions

Pain Point 1: Faulty or unresponsive sensors trigger “Park Assist Unavailable” alerts, leaving drivers without parking support.
Solution: Replace with pre-owned OEM 1063119‑00‑A sensor to restore full Park Assist functionality.

Pain Point 2: False alerts caused by dirt, rain, or snow reduce confidence in parking sensors.
Solution: Durable, weatherproof sensor housing minimizes false alarms and ensures accurate detection.

Pain Point 3: Compatibility concerns and installation difficulties with aftermarket sensors.
Solution: Pre-owned OEM-grade sensor integrates directly with Tesla wiring harness for plug-and-play installation.

Summary Bullet Points:

  • Restore accurate Park Assist alerts
  • Reduce low-speed collision risk
  • OEM-quality pre-owned replacement ensures reliable, long-term performance
  • Plug-and-play installation without programming

FAQ

Q1: Is this an original Tesla part?
A1: Yes, this is an original Tesla OEM part

Q2: Can I install this myself?
A2: Yes, but front/rear bumper removal is required. Professional installation is recommended if unsure.

Q3: Does it work for both front and rear bumpers?
A3: Yes, fully compatible with both front and rear Park Assist positions.

Q4: Will I need to program it?
A4: No programming is required. Plug-and-play with Tesla PDC system.

Q5: How durable is this sensor?
A5: Designed with UV-resistant, weatherproof materials for long-term reliability in all conditions.

Shipping & Return

Cart

loading